toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Power Steering Pump|Removal and Installation|Page 5394 > < Power Steering Pump|Removal and Installation|Page 5392
Page 3
background image

1. Install the power steering vane pump assembly with the pump bracket by doing the following.

a. Temporarily install the pump bracket and bolt to the pump assembly.
b. Tighten the four pump bracket set bolts as follows. Tighten the 12 mm head bolts to 19 Nm (14 ft. lbs.) and the 14 mm head bolts to 39 Nm

(29 ft. lbs.).

Power Steering Pump|Removal and Installation|Page 5394 > < Power Steering Pump|Removal and Installation|Page 5392