toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Power Steering Pump|Removal and Installation|Page 5393 > < Power Steering Pump|Removal and Installation
Page 2
background image

3. Disconnect the pressure feed tube. Remove the union bolt and gasket.

4. Remove the drive belt after removing bolt A and loosening bolt B.
5. Disconnect the two vacuum hoses. 
6. Remove the power steering vane pump assembly with the pump bracket.

a. Remove the four pump bracket set bolts.
b. Remove the bolt and bracket from the pump assembly.

Installation

Power Steering Pump|Removal and Installation|Page 5393 > < Power Steering Pump|Removal and Installation