Celica Supra L6-2759cc 5M Ser (1982)
Proper Position Of Ring Gap
2. Position the ring gaps as shown in the illustration.
Push The Connecting Rod/Piston Assembly With The Marks Facing Forward
3. Push in the piston/connecting rod assembly with the notch facing forward as shown. The mark on the connecting rod should also face towards the
front.
Insert Piston Using Ring Compressor
4. Using a ring compressor, insert the piston/connecting rod assembly into the cylinder.
Match Marks And Install Connecting Rod End Caps
5. Align the matching rod and cap marks and install the rod cap. Torque to 31-34 ft.lbs (4.2-4.8 kgm).
