Corolla L4-1.8L (2ZZ-GE) (2005)
Starter Motor: Service and Repair
Overhaul
OVERHAUL
1. REMOVE MAGNET SWITCH BODY
a. Remove the nut, then disconnect the lead wire from the magnet switch.
b. Remove the 2 screws which are used to secure the magnet switch to the starter drive housing.
c. Remove the magnet switch.
d. Remove the return spring and plunger from the starter drive housing.
2. REMOVE STARTER YOKE ASSEMBLY
a. Remove the 2 through bolts, then pull out the starter yoke together with the starter commutator end frame.
b. Remove the starter yoke from the starter commutator end frame.