Corolla L4-1.8L (2ZZ-GE) (2005)
/Page-850001.png)
Starter Motor: Service and Repair
Replacement
REPLACEMENT
1. DISCONNECT BATTERY NEGATIVE TERMINAL
2. REMOVE ENGINE UNDER COVER RH
3. REMOVE ENGINE UNDER COVER LH
4. REMOVE STARTER ASSEMBLY
a. Disconnect the starter connector.
b. Open the terminal cover.
c. Remove the nut, then remove the starter wire.
d. Remove the 2 bolts, then remove the starter.
5. INSTALL STARTER ASSEMBLY
a. Install the starter assembly with the 2 bolts.
Torque: 37 N.m (378 kgf.cm, 27 ft.lbf)
