Corolla L4-1.8L (2ZZ-GE) (2005)
c. Install the wire harness and connector as shown in the illustration.
34. INSTALL FLOOR SHIFT ASSY
a. Install the floor shift assy with the 4 bolts.
Torque: 12 Nm (122 kgf-cm, 9 ft. lbs.)
HINT: Tighten them in the order, A, B, C and D.
b. Connect the 2 wire harness clamps to the shift lever plate.
c. Connect the 2 connectors.
35. CONNECT TRANSMISSION CONTROL CABLE ASSY
a. Install the control cable to the shift lever plate.
HINT: Fit the claws securely.