Corolla L4-1.8L (2ZZ-GE) (2005)
/Page-673012.png)
b. Install the cable end to the rod of the floor shift assy.
HINT: Install it with the uneven surface facing upward.
36. CONNECT FLOOR SHIFT PARKING LOCK CABLE ASSY
a. Set the accessory tool.
(1) Shift the shift lever to N position and turn the ignition switch to ACC or ON.
(2) Set the accessory tool to the shift lock control unit assy as shown in the illustration.
Accessory tool parts No.: 33693-02010
HINT: Only in the case of reusing the shift lock control unit assy.
b. Using a screwdriver, unlock the claw of the lock key of automatic adjustment parts.
c. Insert the slide cap into the through hole and install.
HINT: Fit the claws securely.
