toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Control Assembly, HVAC|Removal and Installation|Page 5234 > < A/C Control Switch|Page 5231
Page 1
background image

Control Assembly: Service and Repair
Removal and Installation

A/C CONTROL ASSEMBLY REMOVAL

1. Remove These Parts:

a. Center cluster finish lower panel.
b. Center cluster finish panel.
c. Lower finish panel.
d. Glove compartment parts.

2. Disconnect Control Cables

3. Remove A/C Control Assembly

a. Pull out the heater control knobs.
b. Remove the A/C switch.
c. Pull out the A/C control panel.
d. Remove the 4 screws and pull out the A/C control assembly, then disconnect the connector.

A/C CONTROL ASSEMBLY INSTALLATION

Installation is in the reverse order of removal.

HINT:  If cables are in need of adjustment refer to See: Adjustments

Control Assembly, HVAC|Removal and Installation|Page 5234 > < A/C Control Switch|Page 5231