toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Control Module HVAC > < Control Assembly, HVAC|Removal and Installation
Page 1
background image

Control Assembly: Service and Repair
Control Assembly Switches

SWITCHES REMOVAL

1. Remove A/C Switch

Using a screwdriver, pry loose the clips and remove the A/C switch.

REMOVAL HINT:  Tape the screwdriver tip before use.

2. Remove Blower Speed Control Switch

a. Remove the illumination light from the A/C control assembly.
b. Using a screwdriver, pry loose the clip and push out the blower speed control switch to rear of the A/C control assembly.

SWITCH INSTALLATION

Installation is is the reverse order of removal

Control Module HVAC > < Control Assembly, HVAC|Removal and Installation