toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Fluid - M/T > < Fluid - A/T|Capacity Specifications|Page 1345
Page 1
background image

Fluid - A/T: Service and Repair

1. Replace Automatic Transmission Fluid (ATF), as follows: 

NOTICE:  Do not overfill.

a. Using a hexagon wrench, remove the drain plug and drain the fluid.
b. Using a hexagon wrench, install the drain plug securely.
c. Add new fluid through the filler pipe. 

d. Start the engine and shift the selector into all positions from the Park (P) through the Low (L) and then shift into the P.
e. With the engine idling, check the fluid level. Add fluid up to the COOL level on the dipstick.
f.

Check the fluid level with the normal fluid temperature 70 - 80°C (158 - 176°F) and add as necessary. 

NOTICE: Do not overfill.

Fluid - M/T > < Fluid - A/T|Capacity Specifications|Page 1345