Corolla LE Sedan L4-1.8L (1ZZ-FE) (1999)
NOTICE: Take care not to install them in the wrong direction of the shift lever sub-assembly.
7. INSTALL SPRING PLATE
8. INSTALL SHIFT LOCK UNIT
Install the shift control unit and 2 screws.
NOTICE: Install the grooved pin into the groove of the shift lock unit as shown in the illustration.
9. INSTALL CAP, BULB AND INDICATOR LIGHT WIRE
10. ASSEMBLE INDICATOR HOUSING
a. Install the position indicator plate.
b. Install the position indicator slide cover.
c. Install the spring and shift lock release button.
d. Install the shift lock release button cap.
e. Install the position indicator lens.
f.
Install the position indicator lower housing.
NOTICE: Do not make indicator housing dirty with MP grease.
11. INSTALL INDICATOR HOUSING
Install 2 screws and an indicator housing.
12. CONNECT INDICATOR CAP, BULB AND LIGHT WIRE
13. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY
a. Install the O/D main switch.
b. Install the spring and shift lever button.
c. Install the shift lever knob cover.
HINT: Apply MP grease to shift lever knob button.
d. Install the shift lever sub-assembly and 2 screws.
HINT: Coat the threads of the screws with sealant.
Sealant: Part No. 08833-00080, THREE BOND 1344, LOCTITE 242 or equivalent
NOTICE: Make sure not to catch O/D main switch wire harness.
e. Install the O/D main switch wire harness securely to hung on the hook of the shift lever sub-assembly.
14. INSTALL O/D MAIN SWITCH TERMINAL
INSTALLATION