Corolla S Sedan L4-1.8L (1ZZ-FE) (2002)
/Page-756002.png)
Torque: 13 Nm (133 kgf-cm, 10 ft. lbs.)
HINT: At the time of installation, use a torque wrench with a fulcrum length of 300 mm (11.81 inch).
3. REMOVE ABS ACTUATOR
a. Disconnect the connector.
b. Remove the 3 nuts and the ABS actuator assembly.
Torque: 22 Nm (225 kgf-cm, 16 ft. lbs.)
INSTALLATION
Installation is in the reverse order of removal.
HINT: After installation, fill brake reservoir with brake fluid, bleed brake system and check for leaks.
