Corolla S Sedan L4-1.8L (1ZZ-FE) (2002)
Repairs and Inspections Required After a Collision: Service and Repair
Seat Belt System
REPAIRS AND INSPECTIONS REQUIRED AFTER A COLLISION
SEAT BELT SYSTEMS
CAUTION: Replace the seat belt assembly (outer belt, inner belt, bolts, nuts) if it has been used in a severe impact. The entire assembly should be
replaced even if damage is not obvious.
INSPECTION
1. PRETENSIONER IS NOT ACTIVATED
a. Perform a diagnostic system check.*
b. Perform a visual check which includes the following items with the front seat outer belt removed from the vehicle.
-
Check for cuts and cracks in, or marked discoloration of the center pillar lower garnish.
-
Check for cuts and cracks in wire harness, and for chipping in connectors.
-
Check for deformation of the center pillar.
CAUTION: For removal and installation of the front seat outer belt, see Location of components of Seat Belt. Be sure to follow the
correct procedure.
2. PRETENSIONER IS ACTIVATED
a. Perform a diagnostic system check. *
b. Perform a visual check which includes the following item with the front seat outer belt removed from the vehicle.
-
Check for deformation of the center pillar.
-
Check for damage to the connector and wire harness.
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.