Corolla S Sedan L4-1.8L (1ZZ-FE) (2002)
-
Bracket deformation
-
Peeling paint off the bracket
-
Cracks, dents or chips in the case
-
Cracks, dents, chipping and scratches of the connector
-
Peeling off of the label or damage to the serial number
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes.
REPLACEMENT REQUIREMENTS
In the following cases, replace the front airbag sensor.
-
If the SRS has been deployed in a collision.
-
If the front airbag sensor has been found to be faulty in troubleshooting.
-
If the front airbag sensor has been found to be faulty during checking items.
-
If the front airbag sensor has been dropped.
CAUTION: Be sure to follow the correct procedure, for removal and installation of the front airbag sensor.