Corolla S Sedan L4-1.8L (1ZZ-FE) (2002)
d. Using SST, press in the bearing.
SST 09950-60010 (09951-00220, 09951-00280, 09952-06010), 09950-70010 (09951-07100)
e. Coat a new bearing with molybdenum disulfide lithium base grease.
f.
Using SST, press in the bearing.
SST 09950-60010 (09951-00280), 09950-70010 (09951-07100)
3. IF NECESSARY, REPLACE OIL SEAL
a. Using SST, remove the oil seal from the bushing.
SST 09612-24014 (09613-22011)
NOTICE: Be careful not to damage the bushing.
HINT: As shown in the illustration, from the opposite side of SST confirm that its claws are firmly caught on the oil seal.
b. Coat a new oil seal lip with power steering fluid.
c. Using SST, press in the oil seal.
SST 09950-60010 (09951-00230, 09951-00370, 09952-06010), 09950-70010 (09951-07100)
NOTICE: Make sure to install the oil seal facing in the correct direction.
4. IF NECESSARY, REPLACE TEFLON RING