Corolla S Sedan L4-1.8L (1ZZ-FE) (2002)
c. Using SST, press in the oil seal.
SST 09950-60010 (09951-00180, 09951-00320, 09952-06010), 09950-70010 (09951-07100)
NOTICE: Make sure to install the oil seal facing in the correct direction.
d. Coat a new bearing with molybdenum disulfide lithium base grease.
e. Using SST, press in the bearing.
SST 09950-60010 (09951-00190, 09951-00360, 09952-06010), 09950-70010 (09951-07100)
2. IF NECESSARY, REPLACE 2 BEARINGS
a. Using SST, press out the bearing from the steering rack housing.
SST 09950-70010 (09951-07100)
b. Using SST, press out the bearing from the steering rack housing.
SST 09950-70010 (09951-07100)
c. Coat a new bearing with molybdenum disulfide lithium base grease.