toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Igniter <--> [Ignition Control Module]|Description and Operation|Page 1965 > < Igniter <--> [Ignition Control Module]|Description and Operation
Page 1
background image

Igniter: Service and Repair

Distributor, Exploded View

REMOVAL:

1.

Remove distributor from vehicle. Refer to DISTRIBUTOR in this section.

2.

Remove the distributor cap from the distributor.

3.

Remove the ignition rotor, and dust covers.

Ignition Coil Primary Wire Installation

4.

Disconnect the wires from the terminals of the ignition coil.

Ignition Coil Removal

5.

Remove the four retaining screws. Remove ignition coil and dust proof packing.

Igniter <--> [Ignition Control Module]|Description and Operation|Page 1965 > < Igniter <--> [Ignition Control Module]|Description and Operation