toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

2ND Gear Clutch|Page 2186 > < 2ND Gear Clutch|Page 2184
Page 1
background image

Clutch: Service and Repair
Direct Clutch

COMPONENTS

DIRECT CLUTCH DISASSEMBLY

1. CHECK PISTON STROKE OF DIRECT CLUTCH

a. Install the direct clutch on the oil pump.
b. Using a dial indicator (long type pick or SST) measure the direct clutch piston stroke applying and releasing the compressed air (392 - 785

kPa, 4 - 8 kgf/sq.cm, 57 - 114 psi) as shown.

SST 09350-32014 (09351-32190)

Piston stroke:  1.12 - 1.52 mm (0.0441 - 0.0578 in.) 

If the piston stroke is greater than the maximum inspect the each component.

2ND Gear Clutch|Page 2186 > < 2ND Gear Clutch|Page 2184