Corolla Wagon L4-107.5 1762cc 1.8L DOHC (7A-FE) (1993)
/Page-682002.png)
2. REMOVE SNAP RING FROM CLUTCH DRUM
3. REMOVE FLANGE, DISCS AND PLATES
4. REMOVE PISTON RETURN SPRING
a. Place SST on the spring retainer and compress the springs with a shop press.
SST 09350-32014 (09351-32070)
b. Remove the snap ring with the snap ring pliers.
c. Remove the piston return spring.
5. REMOVE CLUTCH PISTON
a. Install the direct clutch the oil pump.
b. Apply compressed air to the oil pump to remove the piston. (If the piston does not come out completely. use needle-nose pliers to remove it.)
c. Remove the direct clutch from the oil pump.
