Corolla Wagon L4-107.5 1762cc 1.8L DOHC (7A-FE) (1993)
/Page-717003.png)
Standard inside diameter: 22.025 - 22.046 mm (0.8671 - 0.8680 in.)
Maximum diameter: 22.096 mm (0.8699 in.)
ONE-WAY CLUTCH AND SUN GEAR ASSEMBLY
1. INSTALL SHAFT SNAP RING TO SUN GEAR
2. INSTALL SUN GEAR TO DRUM
a. Install the sun gear to the drum.
b. Using snap ring pliers, install the snap ring to the drum.
3. REMOVE THRUST WASHER FROM SUN GEAR INPUT DRUM
4. REMOVE SUN GEAR FROM DRUM
a. Using snap ring pliers, remove the snap ring from the drum.
b. Remove the sun gear from the drum.
