Corolla Wagon L4-107.5 1762cc 1.8L DOHC (7A-FE) (1993)
While turning the hub clockwise, remove the one- way clutch from the sun gear.
3. REMOVE THRUST WASHER FROM SUN GEAR INPUT DRUM
4. REMOVE SUN GEAR FROM DRUM
a. Using snap ring pliers, remove the snap ring from the drum.
b. Remove the sun gear from the drum.
5. REMOVE SHAFT SNAP RING
Using snap ring pliers. remove the shaft snap ring from the sun gear.
SUN GEAR INSPECTION
INSPECT SUN GEAR FLANGE BUSHING
Using a dial indicator. measure the inside diameter of the sun gear.