Corolla Wagon L4-107.5 1762cc 1.8L DOHC (7A-FE) (1993)
/Page-792023.png)
130 - 150 g (4.6-5.3 oz.)
Grease color:
Black
5. INSTALL INBOARD JOINT TULIP TO FRONT DRIVE SHAFT
(a) Pack in the grease to the inboard joint tulip and boot.
HINT: Use the grease supplied in the boot kit.
Grease capacity:
230 - 250 g (8.1-8.8 oz.)
Grease color:
Yellow color
(b) Align the matchmarks placed before removal, and install the inboard joint tulip to the drive shaft.
(c) Install the boot to the inboard joint tulip.
6. ASSEMBLE BOOT CLAMPS
(a) Ensure the inboard boot (large side) is on the shaft groove.
(b) Using a boot clamp tool. place pincer jaws in closing hooks of large clamp.
(c) Secure clamp by drawing at closing hooks together.
