Echo L4-1.5L (1NZ-FE) (2000)
3.
Cold Spec Heater Models Only:
Remove Air Duct (Motor Cover).
A.
Disconnect the control link.
B.
Disconnect the connectors.
C.
Disconnect the connector clamps.
D.
Disconnect the wire harness clamps.
E.
Remove the screw.
F.
Release the claw and remove the air duct.
4.
Remove Blower Resistor.
A.
Disconnect the connector.
B.
Remove the 2 screws and blower resistor.