toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Brake Pedal Assy|Testing and Inspection|Page 4122 > < Brake Pedal Assy|Testing and Inspection|Page 4120
Page 3
background image

6. SEPARATE FRONT DOOR OPENING TRIM WEATHERSTRIP
7. REMOVE INSTRUMENT PANEL NO. 1 REGISTER ASSEMBLY
8. SEPARATE HOOD LOCK CONTROL LEVER SUB-ASSEMBLY
9. REMOVE INSTRUMENT PANEL LOWER FINISH PANEL SUB-ASSEMBLY

10. REMOVE STOP LIGHT SWITCH

(a)

Disconnect the stop light switch connector from the stop light switch.

(b) Turn the stop light switch counterclockwise and remove the stop light switch.

11. SEPARATE MASTER CYLINDER PUSH ROD CLEVIS

(a)

Remove the clip and push rod pin and separate the push rod clevis.

12. REMOVE BRAKE PEDAL SUPPORT REINFORCEMENT

(a)

Remove the bolt.

(b) Remove the bolt and nut and remove the reinforcement from the brake pedal support.

13. REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY 

(a)

Remove the 4 nuts and the brake pedal support.

Brake Pedal Assy|Testing and Inspection|Page 4122 > < Brake Pedal Assy|Testing and Inspection|Page 4120