FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
(e)
Install the wire harnesses with the 2 screws.
Torque: 2.9 N*m (30 kgf*cm, 26 in.*lbf.)
(f)
Install 2 new plugs.
9. INSTALL BRAKE ACTUATOR NO. 1 TUBE
(a)
Using SST, install the brake actuator tube.
SST 09023-00101
Torque: for use without SST 15 N*m (155 kgf*cm, 11 ft.*lbf.)
for use with SST 14 N*m (143 kgf*cm, 10 ft.*lbf.)
HINT:
^
Use a torque wrench with a fulcrum length of 300 mm (11.81 in.).
^
This torque value is effective when SST is parallel to the torque wrench.
10. INSTALL BRAKE ACTUATOR HOSE
(a)
Using needle-nose pliers, install the brake actuator hose with the 2 clips.