toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 6092 > < Initial Inspection and Diagnostic Overview|Page 6090
Page 6
background image

a. Check for DTCs.

1. Connect the intelligent tester to the DLC3.
2. Turn the ignition switch to the on position.
3. Check for DTCs by given the prompts on the tester screen.

HINT:  Refer to the intelligent tester operator's manual for further details.

Without Scan Tool

TOYOTA does not provide a procedure for Reading Trouble Codes Without Scan Tool.

Symptom Index

PROBLEM SYMPTOMS TABLE 

Problem Symptoms Table

HINT:  Proceed to the troubleshooting for each circuit in the table given.

Trouble In Passenger Airbag ON / OFF Indicator

Trouble in Passenger Airbag ON / OFF Indicator 

DESCRIPTION 

The occupant classification system detects the front passenger seat condition and then indicates whether the front passenger airbag is activated or not
through the passenger airbag ON/OFF indicator illumination. The passenger airbag ON/OFF indicator illumination changes depending on the front
passenger seat condition as shown in the table given.

Initial Inspection and Diagnostic Overview|Page 6092 > < Initial Inspection and Diagnostic Overview|Page 6090