FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
/Page-860007.png)
5. INSTALL CLUTCH PEDAL BUSH
(a)
Apply MP grease to 2 new bushes.
(b) Install the 2 bushes onto the clutch pedal.
6. INSTALL CLUTCH PEDAL PAD
7. INSTALL CLUTCH PEDAL STOPPER BOLT (w/o Cruise Control)
(a)
Install the clutch pedal stopper bolt and provisionally tighten the lock nut.
HINT: Tighten the lock nut to the specified torque when adjusting the clutch pedal.
8. INSTALL CLUTCH SWITCH ASSEMBLY (w/ Cruise Control)
(a)
Install the clutch switch and provisionally tighten the lock nut.
HINT: Tighten the lock nut to the specified torque when adjusting the clutch pedal.
9. INSTALL CLUTCH PEDAL SPRING HOLDER
(a)
Apply MP grease to the contact surface of the clutch pedal spring holder.
