FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
1. INSTALL CLUTCH MASTER CYLINDER PUSH ROD CLEVIS BUSH
(a)
Apply MP grease to the inside of a new clevis bush.
(b) Install the clevis bush onto the clutch pedal.
HINT: Install the clevis bush from the left side of the vehicle.
2. INSTALL CLUTCH PEDAL TURNOVER BUSH
(a)
Apply MP grease to the clutch pedal turnover bush.
(b) Install the clutch pedal turnover bush onto the clutch pedal.
3. INSTALL CLUTCH PEDAL NO.1 CUSHION
(a)
Install the 3 No. 1 cushions onto the clutch pedal.
4. INSTALL CLUTCH PEDAL SHAFT COLLAR
(a)
Apply MP grease to the clutch pedal shaft collar.
(b) Install the clutch pedal shaft collar onto the clutch pedal.