FJ Cruiser 4WD V6-4.0L (1GR-FE) (2007)
(d) Using SST, push out the spider bearing from the propeller shaft.
SST 09332-25010
HINT: Sufficiently raise the part indicated by (A) so that it does not come into contact with the spider bearing.
(e)
Clamp the spider bearing outer race in a vise and tap off the propeller shaft with a hammer.
NOTICE: Do not tap the shaft.
HINT: Remove the spider bearings on the opposite side in the same procedure.
(f)
Install the 2 removed spider bearing outer races onto the spider.
(g) Using SST, push out the bearing from the yoke.
SST 09332-25010
HINT: Sufficiently raise the part indicated by (A) so that it does not come into contact with the bearing.