Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
(a) Remove the 2 screws.
(b) Disengage the 2 clips and remove the roof console box assembly.
(c) Disconnect the connector.
54. REMOVE LH VISOR ASSEMBLY
(a) Disengage the 3 claws and remove the visor bracket cover.
HINT: Tape the screwdriver tip before use.
(b) Remove the 2 screws and vizor assembly.
(c) Disconnect the connector.
55. REMOVE RH VISOR ASSEMBLY
56. REMOVE VISOR HOLDER
(a) Remove the visor holder by turning it counterclockwise.
HINT: Use the same procedure to remove the other side.
57. REMOVE ROOF HEADLINING ASSEMBLY
(a) Disconnect the roof wire connector and disengage the clamps from the front pillar LH.
(b) Disconnect the washer hose. Remove the bolt and disconnect the radio antenna cord connector and disengage the clamps from the front pillar
RH.