Highlander 2WD V6-3.3L (3MZ-FE) Hybrid (2006)
(a) Using a screwdriver, disengage the 4 claws and remove the lens cover.
HINT: Tape the screwdriver tip before use.
(b) Using a screwdriver, disengage the 2 springs, as shown in the illustration.
HINT: Tape the screwdriver tip before use.
(c) Disengage the 2 claws and remove the room light assembly No.1.
(d) Disconnect the connector.
52. REMOVE ROOM LIGHT ASSEMBLY NO.2
53. REMOVE ROOF CONSOLE BOX ASSEMBLY