Highlander 2WD V6-3.5L (2GR-FE) (2008)
(a) Disengage the 8 claws and guide, and remove the front door scuff plate LH.
17. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH
(a) Remove the clip.
(b) Disengage the clip and claw, and remove the cowl side trim sub-assembly LH.
18. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
(a) Remove the front door opening trim weatherstrip LH.
19. REMOVE FRONT PILLAR GARNISH LH
(a) Pull the upper part of the garnish toward the inside of the cabin and disengage the 2 clips.
(b) Cut off the clip [A].
(c) Disengage the 3 guides and remove the front pillar garnish LH.
(d) Remove the clip [A].