Highlander 2WD V6-3.5L (2GR-FE) (2008)
/Page-1004027.png)
(a) Disconnect the main body ECU connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (MAIN BODY ECU BRANCH WIRE)
OK -- REPLACE MAIN BODY ECU
13. CHECK FOR SHORT IN CAN BUS WIRES (AIR CONDITIONING AMPLIFIER BRANCH WIRE)
(a) Disconnect the air conditioning amplifier connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
