Highlander 2WD V6-3.5L (2GR-FE) (2008)
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (STEERING ANGLE SENSOR BRANCH WIRE)
OK -- REPLACE STEERING ANGLE SENSOR
11. CHECK FOR SHORT IN CAN BUS WIRES (POWER STEERING ECU BRANCH WIRE)
(a) Disconnect the power steering ECU connector.
(b) Measure the resistance according to the value(s) in the table below.
Standard resistance:
NG -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (POWER STEERING ECU BRANCH WIRE)
OK -- REPLACE POWER STEERING ECU
12. CHECK FOR SHORT IN CAN BUS WIRES (MAIN BODY ECU BRANCH WIRE)