Highlander 2WD V6-3.5L (2GR-FE) (2008)
/Page-1553006.png)
(a) Measure the voltage according to the value(s) in the table below.
Standard voltage:
Result:
C -- CHECK HARNESS AND CONNECTOR (ECM - MAIN BODY ECU)
B -- REPLACE ECM
A -- Continue to next step.
11. INSPECT PARK/NEUTRAL POSITION SWITCH ASSEMBLY
(a) Inspect the park/neutral position switch.
(b) Disconnect the park/neutral position switch connector.
(c) Measure the resistance according to the value(s) in the table below.
Standard resistance:
Result:
