Highlander 4WD V6-3.0L (1MZ-FE) (2003)
a. Connect the parking brake cable No. 2 and No. 1 to the parking brake equalizer with the nut.
Torque: 12.5 Nm (128 kgf-cm, 9 ft. lbs.)
b. Connect the parking brake cable No. 2 to the turn buckle.
c. Connect the parking brake cable No. 2 to the backing plate with the 2 bolts.
Torque: 7.5 Nm (80 kgf-cm, 5.5 ft. lbs.)
10. APPLY HIGH TEMPERATURE GREASE
a. Apply the high temperature grease to the shoe attached surface of the backing plate.
11. INSTALL PARKING BRAKE SHOE ASSY LH NO.1
12. INSTALL PARKING BRAKE SHOE ASSY RH OR CENTER NO.2
13. CHECK PARKING BRAKE INSTALLATION
14. INSTALL REAR DISC
15. ADJUST PARKING BRAKE SHOE CLEARANCE
16. INSTALL REAR DISC BRAKE CALIPER ASSY, RH
17. INSTALL REAR WHEEL
Torque: 103 Nm (1,050 kgf-cm, 76 ft. lbs.)
18. CHECK PARKING BRAKE PEDAL TRAVEL
19. ADJUST PARKING BRAKE PEDAL TRAVEL