Highlander 4WD V6-3.0L (1MZ-FE) (2003)
a. Remove the 2 bolts, and disconnect the parking brake cable No. 2 from the backing plate.
b. Loosen the lock nut, and disconnect the parking brake cable No. 2 from the turn buckle.
c. Remove the nut, and disconnect the parking brake cable No. 1 and No. 2 from the parking brake equalizer.
7. REMOVE PARKING BRAKE CABLE ASSY NO.2
a. Remove the bolt, 7 nuts and parking brake cable No. 2.
8. INSTALL PARKING BRAKE CABLE ASSY NO.2
a. Install the parking brake cable No. 2 with the bolt and 7 nuts.
Torque:
8.0 Nm (82 kgf-cm, 71 inch lbs.) for Bolt
5.0 Nm (51 kgf-cm, 44 inch lbs.) for Nut
9. CONNECT PARKING BRAKE CABLE ASSY NO.2