Highlander 4WD V6-3.0L (1MZ-FE) (2003)
b. Using snap ring expander, install a new snap ring.
32. INSTALL FRONT DRIVE SHAFT DUST COVER (2WD)
a. Using SST and a press, install a new dust cover.
SST 09726-00010, 09527-10011
33. INSTALL FRONT DRIVE SHAFT DUST COVER RH (2WD)
a. Using SST and a press, install a new dust cover until the distance from the tip of center drive shaft to the dust cover reaches the specification,
as shown in the illustration.
SST 09527-10011
Distance: 91.5 ± 0.5 mm (3.6 ± 0.02 inch)
34. INSTALL FRONT DRIVE SHAFT DUST COVER RH (4WD)
a. Using SST and a press, install a new dust cover.
SST 09527-10011