Highlander 4WD V6-3.0L (1MZ-FE) (2003)
b. Using SST and a press, remove the bearing.
SST 09527-10011
c. Remove the snap ring.
29. INSTALL FRONT DRIVE SHAFT BEARING (2WD)
a. Using SST and a press, install a new bearing.
SST 09950-60020 (09951-00710), 09950-70010 (09951-07100)
30. INSTALL CASE SUB ASSY, DRIVE SHAFT BEARING SNAP RING (2WD)
a. Using a screwdriver, install a new snap ring.
31. INSTALL DRIVE SHAFT BEARING CASE SUB ASSY (2WD)
a. Using SST and a press, install the bearing case to the inboard joint.
SST 09527-10011, 09710-04081