Highlander LTD 2WD V6-3.0L (1MZ-FE) (2002)
/Page-611001.png)
Shift Cable: Service and Repair
REPLACEMENT
1. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSY CENTER
2. REMOVE FLOOR CARPET COVER CENTER RH
3. REMOVE FLOOR CARPET COVER CENTER LH
4. REMOVE INSTRUMENT PANEL FINISH PANEL LOWER CENTER
5. REMOVE BATTERY
6. REMOVE AIR CLEANER ASSY
7. REMOVE AIR CLEANER HOSE NO. 1
8. REMOVE FLOOR SHIFT TRANSMISSION CONTROL CABLE ASSY
a. Remove the nut from the control shaft lever.
b. Disconnect the control cable from the control abaft lever.
c. Remove the clip and disconnect the control cable from the control cable bracket.
d. Disconnect the control cable from the control cable clamp.
e. Disconnect the cable end from the rod of the floor shift assy.
