Highlander LTD 2WD V6-3.0L (1MZ-FE) (2002)
e. Install the indicator lamp wire harness and connector as shown in the illustration.
33. INSTALL FLOOR SHIFT ASSY
a. Install the floor shift assy to the vehicle with the 4 nuts.
Torque: 11.8 Nm (122 kgf-cm, 9 ft. lbs.)
HINT: Tighten them in the order, A, B, C and D.
b. Connect the 3 connectors.
34. INSTALL FLOOR SHIFT TRANSMISSION CONTROL CABLE ASSY
a. Connect the cable end to the floor shift assy.
HINT: Install it with the uneven surface facing up.