Highlander LTD 2WD V6-3.0L (1MZ-FE) (2002)
/Page-610007.png)
b. Install the indicator lamp wire to the position indicator housing lower.
29. INSTALL TRANSMISSION CONTROL SWITCH
a. Install the transmission control switch to the shift lever knob cover No. 1.
HINT: Fit the claws securely.
b. Install the shift lever knob cover No. 1 to the shift lever knob with a screw.
30. INSTALL SHIFT LEVER KNOB BUTTON
a. Apply MP grease to the shift lever knob button and spring and install them to the shift lever knob.
31. INSTALL FLOOR SHIFT SHIFT LEVER KNOB COVER
a. Install the shift lever knob cover to the shift lever.
32. INSTALL FLOOR SHIFT SHIFT LEVER KNOB SUB-ASSY
a. Install the wire harness of the transmission control switch as shown in the illustration.
b. Install the shift lever knob to the shift lever with 2 screws.
c. Install the shift lever knob cover to shift lever knob.
d. Install the 2 wire harnesses of the transmission control switch.
