Landcruiser V8-4.7L (2UZ-FE) (2000)
Keyless Entry Receiver: Service and Repair
NOTE: When replacing the door control receiver and transmitter, registration of recognition code is necessary because they are provided as single
components.
a. Select which operation mode should be performed from the following modes.
-
Add mode
-
Rewrite mode
-
Prohibition mode
-
Confirmation mode
HINT:
-
The add mode is used to retain codes already registered while you register new recognition codes. This mode is used when adding a
transmitter. However, if the number of registered codes exceeds 4 codes, previously registered codes are correspondingly erased in order,
starting from the first registered code.
-
The rewrite mode is used to erase all previously registered codes and register only new recognition codes.
-
The prohibition mode is used to erase all registered codes and cancels the wireless door lock function. Use this mode when the transmitter is
lost.
-
The confirmation mode is for confirming how many recognition codes are already registered before you register additional recognition codes.