Matrix FWD L4-1.8L (2ZR-FE) (2010)
(c) Using a union nut wrench (10 mm), disconnect the 6 brake lines from the actuator assembly.
(d) Use tags or make a memo to identify the places to reconnect.
HINT
*
*1: To front wheel cylinder RH
*
*2: To front wheel cylinder LH
*
*3: To rear wheel cylinder RH
*
*4: To rear wheel cylinder LH
*
*5: From 1st master cylinder chamber
*
*6: From 2nd master cylinder chamber
(e) Remove the 2 bolts, nut and brake actuator with bracket from the body.
NOTICE:
*
Do not damage the brake lines or wire harness.
*
Do not carry the brake actuator assembly by the connector.