Matrix FWD L4-1.8L (2ZR-FE) (2010)
(b) Align the mark plate (orange) with the timing mark of the No. 2 camshaft as shown in the illustration and install the chain.
HINT
*
Be sure to position the mark plate at the front of the engine.
*
The mark plate on the camshaft side is colored orange.
*
Do not pass the chain around the sprocket of the camshaft timing gear assembly. Only place it on the sprocket.
*
Pass the chain through the No. 1 vibration damper.
(c) Place the chain on the crankshaft without passing it around the shaft.
(d) Hold the hexagonal portion of the camshaft with a wrench and turn the camshaft timing gear assembly counterclockwise to align the mark plate
(orange) and timing mark.