Matrix FWD L4-2.4L (2AZ-FE) (2009)
/Page-1784011.png)
(a) Install the front speed sensor and front flexible hose to the front shock absorber with the bolt.
Torque: 29 Nm (296 kgf-cm, 21 ft-lbf)
NOTE: Do not twist the front speed sensor when installing it.
HINT: Install the speed sensor harness bracket first and then the front flexible hose.
(b) Install the front speed sensor with the clamp to the front shock absorber.
13. INSTALL FRONT STABILIZER LINK ASSEMBLY
(a) Install the front stabilizer link assembly to the front shock absorber with coil spring with the nut.
Torque: 74 Nm (755 kgf-cm, 55 ft-lbf)
NOTE: If the ball joint turns together with the nut, use a hexagon wrench (6 mm) to hold the stud bolt.
14. INSTALL OUTER COWL TOP PANEL See: Brakes and Traction Control/Hydraulic System/Brake Master Cylinder/Service and Repair/Removal
and Replacement/Installation
15. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front
Wiper Motor/Installation
16. INSTALL COWL TOP VENTILATOR LOUVER LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
17. INSTALL COWL TOP VENTILATOR LOUVER RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
18. INSTALL HOOD TO COWL TOP SEAL See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Installation
19. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
20. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper
Motor/Installation
21. INSTALL FRONT WIPER ARM HEAD CAP See: Wiper and Washer Systems/Wiper Motor/Service and Repair/Front Wiper Motor/Installation
22. INSTALL FRONT WHEEL
Torque: 103 Nm (1050 kgf-cm, 76 ft-lbf)
23. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
HINT: Inspect and adjust front wheel alignment See: Alignment/Service and Repair/Front Wheel Alignment.
