Matrix FWD L4-2.4L (2AZ-FE) (2009)
(c) Fully tighten the front support to front shock absorber nut.
Torque: 47 Nm (479 kgf-cm, 35 ft-lbf)
(d) Apply No. 2 MP grease into the suspension support sub-assembly.
NOTE: Do not apply grease to the rubber surfaces of the front suspension support sub-assembly.
11. INSTALL FRONT SUSPENSION SUPPORT DUST COVER
(a) Install the front suspension support dust cover.
12. INSTALL FRONT SPEED SENSOR