MR2 L4-122 1998cc 20L DOHC Turbo Timing Belt Removal
9. Slightly jack up engine.
Raise the engine enough to remove the weight from the engine mounting on the right side.
10. Remove RH engine mounting stay.
Remove the two bolts, nut and mounting stay.
11, Remove RH engine mounting insulator.
Remove the through bolt, two nuts and mounting insulator.
12. Remove RH engine mounting bracket.
Remove the three bolts and mounting bracket.
HINT: Raise the jack and perform the operation with the engine fully up.
13. Remove EGR vacuum modulator and VSV.
14. Remove throttle body.