MR2 L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1991)
/Page-764002.png)
3. DISASSEMBLE OF DIFFERENTIAL CASE
a. Place the matchmarks on the differential right and left case.
b. Using a torx wrench, remove the sixteen torx screws.
Torx wrench T50 09042-00040
c. Using a plastic hammer, tap out the differential left case.
d. Remove the speedometer drive gear from the differential right case.
e. Remove the two differential side gears, two side thrust washers, differential spider, four differential pinions and four pinion washers from the
differential left case.
