MR2 L4-122 1998cc 2.0L DOHC Turbo (3S-GTE) (1991)
/Page-764003.png)
4. (Transmission Case Side)
IF NECESSARY, REPLACE OIL SEAL AND TAPER ROLLER BEARING OUTER RACE
a. Using a screwdriver, remove the oil seal.
b. Remove the transmission oil baffle.
c. Using a brass bar and hammer, drive out the bearing outer race lightly and evenly.
d. Remove the shim.
e. Install the shim.
HINT: First select and install a shim of lesser thickness than before.
f.
Using SST and a press, install the taper roller bearing outer race.
SST 09316-60010 (09316-00010, 09316-00040)
